ECH6 Hinged Manual Pipe Cutter – 4–6 Inch
The ECH6 Hinged Manual Pipe Cutter is a portable mechanical cold-cutting tool designed for carbon steel, stainless steel, cast iron, and ductile iron pipes.
Featuring a hinged frame, four cutting wheels, and a short operating handle, the ECH6 provides controlled pipe cutting in restricted working areas, including narrow trenches, pipe racks, and industrial maintenance locations.
With a manufacturer-listed pipe cutting range of 114–182 mm (nominal 4–6 inches), a maximum wall thickness of 12 mm, and a net weight of approximately 8.5 kg, the ECH6 offers a practical solution for industrial pipe cutting without requiring electricity or compressed air.
Key Features
1. Hinged Design for Confined Spaces
- The hinged frame allows the cutter to open and fit around installed pipes, making positioning and installation convenient in areas with limited access.
- Its short operating handle provides an approximately 90–110° swing range, making the tool suitable for narrow trenches, pipe racks, and other confined working environments.
2. Manual Cold Cutting Operation
- The ECH6 operates entirely by hand without an external electrical or pneumatic power supply.
- Its mechanical cutting method avoids the concentrated heat associated with thermal cutting, helping reduce heat input during pipe cutting.
3. Four-Wheel Cutting System
- The ECH6 features four cutting wheels designed to apply pressure around the pipe circumference.
- Manufactured from high-strength, heat-treated steel, the cutting wheels are designed to balance hardness, toughness, and wear resistance for reliable cutting performance.
4. Precision Guide Frame
- The rigid guide frame and positioning mechanism help maintain cutting wheel alignment during operation.
- This supports straight, controlled cuts and helps reduce the risk of cutting wheel deviation.
5. Adjustable Feed Mechanism
- The adjustable feed screw allows operators to progressively increase cutting pressure during operation.
- The quick-opening frame mechanism helps simplify tool positioning around the pipe.
6. Durable and Portable Construction
- The reinforced steel structure is designed for industrial pipe cutting applications.
- With a listed net weight of approximately 8.5 kg, the ECH6 can be transported and positioned for workshop and on-site maintenance operations.
7. Multiple Pipe Material Compatibility
The ECH6 is designed for cutting:
- Carbon Steel Pipes
- Stainless Steel Pipes
- Cast Iron Pipes
- Ductile Iron Pipes
Actual cutting capacity depends on the material grade, outside diameter, wall thickness, and cutting wheel configuration.
ECH6 Technical Specifications
| Parameter | Specification | Parameter | Specification |
| Model | ECH6 | Product Type | Hinged Manual Pipe Cutter |
| Nominal Pipe Size | 4–6 inches | Pipe OD Range | 114–182 mm |
| Cutting Method | Manual Cold Cutting | Power Requirement | None |
| Max. Wall Thickness | 12 mm (supplier-listed) | Cutting System | Four Cutting Wheels |
| Handle Swing | Approx. 90–110° | Cutting Wheel Material | Heat-Treated Steel |
| Machine Dimensions | 620 × 300 × 65 mm* | Net Weight | 8.5 kg |
| Compatible Materials | Carbon Steel, Stainless Steel, Cast Iron, Ductile Iron | Operation | Manual |
| Color | Red | Country of Origin | China |
The supplier also lists machine dimensions of 600 × 300 × 65 mm. Final dimensions require confirmation.
ECH Series Model Comparison
| Model | Nominal Pipe Size | Pipe OD Range | Dimensions (mm) | Net Weight |
| ECH2 | 1–2″ | 32–76 mm | 430 × 160 × 60 | 3 kg |
| ECH4 | 2–4″ | 60–125 mm | 530 × 230 × 65 | 6 kg |
| ECH6 | 4–6″ | 114–182 mm | 620 × 300 × 65 | 8.5 kg |
| ECH8 | 6–8″ | 168–240 mm | 750 × 350 × 65 | 10 kg |
| ECH12 | 8–12″ | 219–356 mm | 910 × 500 × 65 | 14.5 kg |
Dimensions and cutting ranges are based on supplier-provided specifications and should be confirmed before ordering.
Applications
The ECH6 Hinged Manual Pipe Cutter is suitable for:
- Pipeline Construction and Installation
- Oil & Gas Pipeline Maintenance
- Industrial Pipe Repair
- Pipe Cutting in Narrow Trenches
- Pipe Rack Maintenance
- Petrochemical Plant Maintenance
- Water and Gas Pipeline Work
- Workshop Pipe Fabrication
Its hinged design is particularly useful where limited access makes conventional pipe cutting operations difficult.
Request a Quote
Looking for a hinged manual pipe cutter for industrial maintenance or pipeline construction?
MECBASE supplies ECH series pipe cutting equipment for different pipe sizes and applications.
Please provide your pipe outside diameter, wall thickness, material, quantity, and delivery destination.
Contact MECBASE for model selection assistance and a quotation.
Frequently Asked Questions
The ECH6 is designed for nominal 4–6 inch pipes, with a manufacturer-listed outside diameter range of 114–182 mm.
The ECH6 is designed for carbon steel, stainless steel, cast iron, and ductile iron pipes. Actual cutting capacity depends on pipe material, diameter, wall thickness, and cutting wheel selection.
The manufacturer lists a maximum cutting wall thickness of 12 mm. Suitability for specific pipe materials and grades should be confirmed before ordering.
Yes. Its hinged frame and short operating handle allow an approximately 90–110° handle swing, making it suitable for narrow trenches, pipe racks, and restricted working areas.
No. The ECH6 is a fully manual pipe cutting tool and does not require electricity or compressed air.
Related products
-
Pipe Cutting MachinesECG2 Compact Manual Pipe Cutter – 1/2–2 Inch
-
Pipe Cutting MachinesZD400 Electric Orbital Pipe Cutter – 75–400 mm
-
Pipe Cutting MachinesECR12 Manual Rotary Pipe Cold Cutter – Low Clearance
-
Pipe Cutting MachinesID-Mounted Pneumatic Pipe Beveling Machine – Portable Pipe End Beveler