ZD400 Electric Orbital Pipe Cutter – 75–400 mm

1. Wide Cutting Range

• The ZD400 is designed for pipes with outside diameters ranging from 75 to 400 mm.
• It can handle various pipe materials, including steel, stainless steel, cast iron, copper, plastic, and multilayer pipes, subject to blade selection and material-specific cutting limits.

2. Powerful 1750W Electric Motor

• Powered by a 1750W motor, the ZD400 provides consistent cutting performance for different pipe materials.
• The machine has a manufacturer-specified no-load speed of 2900 rpm and operates on a 220V, 50Hz power supply in the standard listed configuration.

3. Precision Orbital Cutting

• The cutter moves around the pipe circumference to complete the cut without manually rotating the pipe.
• This cutting method supports accurate pipe cutting and produces relatively flat cut ends suitable for subsequent pipe preparation and joining operations.

4. Portable Four-Wheel Design

• The integrated four-wheel support system assists movement around the pipe during cutting.
• With a manufacturer-stated machine weight of approximately 12 kg, the ZD400 can be transported between workshops and job sites.

5. Cutting Capacity for Different Materials

• The ZD400 has the following manufacturer-stated maximum cutting thicknesses:
• Steel Pipe: Up to 10 mm
• Stainless Steel Pipe: Up to 8 mm
• Plastic Pipe: Up to 35 mm
• Actual cutting capability depends on pipe material, blade type, operating conditions, and pipe dimensions.

6. Convenient On-Site Operation

• The compact electric design is suitable for on-site pipe cutting where moving or rotating the installed pipe is impractical.
• Its cutting system is designed to reduce handling effort and support efficient installation and maintenance work.