ECH2 Hinged Manual Pipe Cutter – 1–2 Inch
The ECH2 Hinged Manual Pipe Cutter is a compact cold-cutting tool designed for cutting carbon steel, stainless steel, cast iron, and ductile iron pipes.
Featuring a hinged frame, four cutting wheels, and a short operating handle, the ECH2 provides a practical cutting solution for pipe maintenance, installation, and fabrication in confined working spaces.
With a cutting range of 32–76 mm and a lightweight 3 kg design, the ECH2 is particularly suitable for smaller-diameter pipes. Its manual cutting mechanism requires no electricity or compressed air.
Key Features
1. Compact Hinged Design
- The hinged frame allows the cutter to open and fit around the pipe, making installation and positioning convenient in restricted areas.
- Its short handle operates with an approximately 90–110° swing angle, making the tool suitable for narrow trenches, pipe racks, and other confined workspaces.
2. Manual Cold Cutting Operation
- The ECH2 operates entirely by hand, without electricity, compressed air, or external power equipment.
- The mechanical cutting process avoids the heat normally associated with abrasive or thermal cutting and helps minimize cutting sparks and debris.
3. Four-Wheel Cutting System
- The cutter features four cutting wheels designed to apply cutting pressure around the pipe circumference.
- Manufactured from strengthened steel with special heat treatment, the cutting wheels provide a balance of hardness, toughness, and wear resistance.
4. Straight and Controlled Cutting
- A rigid guide frame helps maintain proper cutting alignment.
- The adjustable feed screw allows the operator to gradually increase cutting pressure during operation, supporting consistent cutting performance and straight cuts.
5. Lightweight and Portable
- Weighing approximately 3 kg, the ECH2 is easy to carry and position during maintenance and on-site pipe cutting work.
- Its compact dimensions of 430 × 160 × 60 mm make it a practical tool for pipe cutting where space and portability are important.
6. Multiple Pipe Material Compatibility
The ECH2 is designed for cutting:
- Carbon Steel Pipes
- Stainless Steel Pipes
- Cast Iron Pipes
- Ductile Iron Pipes
Cutting performance depends on pipe diameter, wall thickness, material grade, and cutting wheel condition.
ECH2 Technical Specifications
| Parameter | Specification |
| Model | ECH2 |
| Product Type | Hinged Manual Pipe Cutter |
| Cutting Method | Manual Cold Cutting |
| Nominal Pipe Size | 1–2 inches |
| Pipe Outside Diameter | 32–76 mm |
| Maximum Cutting Wall Thickness | 7.9 mm (manufacturer-stated) |
| Compatible Materials | Carbon Steel, Stainless Steel, Cast Iron, Ductile Iron |
| Cutting System | Four Cutting Wheels |
| Handle Material | Steel |
| Operating Handle Swing | Approximately 90–110° |
| Power Requirement | None |
| Machine Dimensions | 430 × 160 × 60 mm |
| Net Weight | Approximately 3 kg |
| Country of Origin | China |
ECH Series Model Selection
The ECH hinged pipe cutter series is available in five models to accommodate different pipe sizes.
| Model | Nominal Pipe Size | Pipe OD Range | Dimensions (mm) | Net Weight |
| ECH2 | 1–2″ | 32–76 mm | 430 × 160 × 60 | 3 kg |
| ECH4 | 2–4″ | 60–125 mm | 530 × 230 × 65 | 6 kg |
| ECH6 | 4–6″ | 114–182 mm | 620 × 300 × 65 | 8.5 kg |
| ECH8 | 6–8″ | 168–240 mm | 750 × 350 × 65 | 10 kg |
| ECH12 | 8–12″ | 219–356 mm | 910 × 500 × 65 | 14.5 kg |
The nominal pipe size and outside diameter ranges are reproduced from the supplier’s specifications. Please confirm the actual pipe outside diameter and wall thickness before selecting a model.
Applications
The ECH2 Hinged Manual Pipe Cutter is suitable for:
- Pipeline Installation and Maintenance
- Industrial Pipe Repair
- Pipe Cutting in Narrow Trenches
- Pipe Rack Maintenance
- Water and Gas Pipeline Work
- Workshop Pipe Fabrication
- On-Site Pipe Cutting
The compact hinged design makes it especially useful for smaller pipes installed in locations with limited working clearance.
Request a Quote
Looking for a compact manual pipe cutter for your project?
MECBASE supplies ECH series hinged pipe cutters for various pipe sizes and industrial applications.
Please provide your pipe outside diameter, wall thickness, material, required quantity, and delivery destination.
Contact MECBASE for product selection assistance and a quotation.
Frequently Asked Questions
The ECH2 is designed for nominal 1–2 inch pipes, with a manufacturer-stated outside diameter range of 32–76 mm.
The ECH2 is designed for carbon steel, stainless steel, cast iron, and ductile iron pipes. Actual cutting capability depends on the pipe material and wall thickness.
Yes. Its compact hinged frame and short handle allow operation with an approximately 90–110° handle swing, making it suitable for narrow trenches and pipe racks.
No. The ECH2 is a fully manual cold-cutting tool and requires no electricity or compressed air.
The manufacturer lists a maximum cutting wall thickness of 7.9 mm. Suitability should be confirmed for the specific pipe material and application.
Customization may be available depending on technical requirements and order quantity. Contact MECBASE to discuss your application and specifications.
The listed minimum order quantity is 1 set, subject to order confirmation. Contact MECBASE for current availability and pricing.
Related products
-
Pipe Cutting MachinesECH6 Hinged Manual Pipe Cutter – 4–6 Inch
-
Pipe Cutting MachinesECR8 Manual Rotary Pipe Cold Cutter – 6–10 Inch
-
Pipe Cutting MachinesECR12 Manual Rotary Pipe Cold Cutter – Low Clearance
-
Pipe Cutting MachinesID-Mounted Electric Pipe Beveling Machine – Portable Pipe End Beveler