Pneumatic Split Frame Pipe Cutting and Beveling Machine for 22 Inch Pipes
The Pneumatic Split Frame Pipe Cutting and Beveling Machine is designed for on-site cold cutting and pipe end preparation. Its air-driven configuration, split-frame mounting structure, and automatic tool feed make it suitable for industrial pipeline maintenance, installation, and repair applications.
Key Features and Performance Advantages
1. Pneumatic Drive for Industrial Field Operations
The air-driven configuration uses compressed air to power the machining process, making it a practical option for job sites equipped with suitable pneumatic supply systems. It offers an alternative to electric-powered equipment for pipeline maintenance and industrial field applications.
2. Fast Setup Around Existing Pipelines
The machine features an openable split-frame construction that allows operators to install it around the pipe circumference. This mounting method is particularly useful when working with fixed pipelines, large pipe sections, or locations where access to the pipe end is restricted.
3. Cold Cutting Without Thermal Cutting Processes
The machine performs mechanical cold cutting and beveling, providing a practical method of preparing pipe ends without relying on flame-cutting processes. It is suitable for pipeline work where controlled mechanical machining is required.
Actual suitability for hazardous or classified areas must be assessed according to the site requirements and the equipment’s applicable certifications.
4. Semi-Automatic Machining and Tool Feed
The tool holder moves automatically during operation, helping maintain a consistent feed movement throughout the machining process. Operators can select the required machining operation according to the pipe preparation task.
5. Adjustable Beveling for Different Welding Requirements
The bevel angle can be adjusted according to the required pipe end profile. This allows the equipment to accommodate different welding preparation specifications and machining requirements.
6. Multiple Machining Operations in One Machine
The equipment supports several machining processes, including:
Pipe cold cutting
Pipe end beveling
Simultaneous cutting and beveling
Internal boring
Counterboring
Flange facing
Pipe end preparation
External diameter machining
These functions make the machine suitable for a variety of pipeline fabrication and maintenance tasks.
7. Multiple Sizes and Customization Options
The product series covers pipe outside diameters from 25mm to 1430mm. Different machine sizes and configurations are available, with customization based on customer drawings, samples, and specific project requirements.
Technical Specifications
| tem | Specification |
| Product Name | Pneumatic Split Frame Pipe Cutting and Beveling Machine |
| Machine Type | Pipe Cold Cutting and Beveling Machine |
| Structure | Split Frame |
| Mounting Method | External Clamping (OD Mounted) |
| Application | Pipe Cutting and End Preparation |
| Automatic Grade | Semi-Automatic |
| Tool Feed | Automatic |
| Bevel Angle | Adjustable |
| Drive Options | Pneumatic / Electric / Hydraulic |
| Standard Wall Thickness | ≤30mm |
| Heavy-Duty Wall Thickness | ≤110mm |
| Working Range | Model Dependent |
| Certification | ISO, subject to certificate verification |
| Customization | Available |
Note: The machine’s actual working diameter, cutting capacity, and drive configuration depend on the selected model. Please confirm the pipe outside diameter and required specifications before ordering.
Available Models and Pipe Working Range
Different models are available to accommodate a wide range of pipeline dimensions. The series covers pipe outside diameters from 25mm to 1430mm, providing options for both small and large industrial piping systems.
| Model | Nominal Pipe Size Range | Working Range (OD) | Standard Wall Thickness | Heavy-Duty Wall Thickness | Rotation Speed |
| 89 | 1″–3″ | 25–89mm | ≤30mm | – | 42 r/min |
| 168 | 2″–6″ | 50–168mm | ≤30mm | – | 18 r/min |
| 230 | 3″–8″ | 80–230mm | ≤30mm | – | 15 r/min |
| 275 | 5″–10″ | 125–275mm | ≤30mm | – | 14 r/min |
| 305 | 6″–10″ | 150–305mm | ≤30mm | ≤110mm | 13 r/min |
| 325 | 6″–12″ | 168–325mm | ≤30mm | ≤110mm | 13 r/min |
| 377 | 8″–14″ | 219–377mm | ≤30mm | ≤110mm | 12 r/min |
| 426 | 10″–16″ | 273–426mm | ≤30mm | ≤110mm | 12 r/min |
| 457 | 12″–18″ | 300–457mm | ≤30mm | ≤110mm | 12 r/min |
| 508 | 14″–20″ | 355–508mm | ≤30mm | ≤110mm | 12 r/min |
| 560 | 16″–22″ | 400–560mm | ≤30mm | ≤110mm | 12 r/min |
| 610 | 18″–24″ | 457–610mm | ≤30mm | ≤110mm | 11 r/min |
| 630 | 20″–24″ | 480–630mm | ≤30mm | ≤110mm | 11 r/min |
| 660 | 20″–26″ | 508–660mm | ≤30mm | ≤110mm | 11 r/min |
| 715 | 22″–28″ | 560–715mm | ≤30mm | ≤110mm | 11 r/min |
| 762 | 24″–30″ | 600–762mm | ≤30mm | ≤110mm | 11 r/min |
| 830 | 26″–32″ | 660–830mm | ≤30mm | ≤110mm | 10 r/min |
| 914 | 30″–36″ | 762–914mm | ≤30mm | ≤110mm | 10 r/min |
| 1066 | 36″–42″ | 914–1066mm | ≤30mm | ≤110mm | 10 r/min |
| 1230 | 42″–48″ | 1066–1230mm | ≤30mm | ≤110mm | 10 r/min |
| 1430 | 48″–56″ | 1230–1430mm | ≤30mm | ≤110mm | 8 r/min |
The 22-inch nominal pipe application should be matched to the actual pipe outside diameter. Model 715 covers an OD range of 560–715mm. Please confirm the required model before ordering.
Industrial Applications
The pneumatic split frame pipe cutting and beveling machine is suitable for industrial pipeline operations that require reliable on-site machining and pipe end preparation.
Typical application sectors include:
Oil and gas pipeline maintenance
Petrochemical and chemical plants
Power generation facilities
Industrial piping systems
Shipbuilding and marine engineering
Pipeline installation and replacement
Steel pipe fabrication workshops
Industrial equipment maintenance
Its pneumatic drive option is particularly relevant to facilities and job sites where compressed air is part of the available utility infrastructure.
Quality Control and Customization
Each machine undergoes visual and functional inspection before delivery to help verify its appearance and basic operating condition.
Customization services are available for different pipeline dimensions and machining requirements. Customers can provide samples, technical drawings, or reference designs for evaluation.
Available customization options include:
Machine size and working diameter
Drive system configuration
Machining tool and beveling requirements
Special application configurations
Adjustments based on customer drawings or samples
ISO-related certification documentation can be provided subject to the manufacturer’s actual certificates and applicable product scope.
Request a Quote
Need an air-driven pipe cutting and beveling solution for your pipeline project?
Share your pipe outside diameter, wall thickness, material, required bevel angle, and available air supply specifications with our team. We can help identify the appropriate machine size and drive configuration for your application.
Contact us today to discuss your pipe machining requirements and request a technical proposal and quotation.
Frequently Asked Questions
Yes, the product series includes models suitable for 22-inch nominal pipe applications. The appropriate model should be selected according to the actual pipe outside diameter. Model 715, for example, covers an OD range of 560–715mm.
The pneumatic configuration uses compressed air as its power source. It is suitable for industrial sites with an appropriate air supply and provides an alternative to electric and hydraulic drive configurations.
No. Its split-frame construction allows the machine to be opened and installed around an existing pipeline, avoiding the need to slide the equipment over the pipe end.
Yes. The machine supports simultaneous cutting and beveling, as well as separate machining operations, depending on the selected tooling and configuration.
Yes. The bevel angle can be selected according to the required pipe end preparation profile.
Yes. Custom configurations can be discussed based on pipe dimensions, machining requirements, customer drawings, and samples.
Related products
-
Pipe Beveling Machines1066–1230mm (42–48 Inch) Split Frame Pipe Cutting and Beveling Machine – Model 1230
-
Pipe Beveling Machines610mm 24 Inch Steel Pipe Cutting and Beveling Machine – Model 610
-
Pipe Beveling MachinesPneumatic Hydraulic Pipe Cutting & Beveling Machine
-
Pipe Beveling MachinesSplit Frame Pipe Cutting and Beveling Machine – Portable Pipe Cutting and Beveling Equipment